DC motor is a rotating motor that can transform DC electric powered power into mechanical vitality (DC motor) or mechanical strength into DC electric strength (DC generator). It is a motor that can convert DC and mechanical vitality into 1 another. When it runs as a motor, it is a immediate present motor, which converts electrical strength into mechanical strength when it runs as a generator, it is a immediate existing generator, which converts mechanical energy into electrical vitality.
|Item Identify||Z4-355-42 400KW 440V 600rpm Motor DC Motor for Printing and Dyeing CZPT|
|Motor Type||DC Motor,ACMotor,Stepper Motor,Asynchronous Motor ,Synchronous Motor
|Composition structure||The composition of DC motor must consist of two elements: stator and rotor. The static component of DC motor is known as stator. The primary perform of stator is to create magnetic area, which is composed of base, major magnetic pole, commutation pole, end cap, bearing and brush unit. Running component is known as rotor, whose principal purpose is to create electromagnetic torque and inductive electromotive pressure. It is the hub of energy conversion of DC motor. So it is also typically named armature, which is composed of rotor, armature main, armature winding, commutator and enthusiast.|
|Torque assortment||1.5 ~180kNm|
|Safety stage||IP23, IP44|
|Functioning pace||Constant Speed /Low Pace /Change Speed /Large Speed Other|
|Main classification||DC Motor is a equipment that converts mechanical strength into DC energy. It is mainly used as DC motor for DC motor, electrolysis, electroplating, smelting, charging and excitation power provide of alternator. Though in areas in which DC power is required, AC power rectifier is also utilized to transform AC into DC power, but from some aspects of functionality, AC rectifier power offer can not totally exchange DC generator.|
|Software||DC motors are extensively utilised in tape recorders, online video recorders, movie discs, electric shavers, hair dryers, digital watches, toys and so on.|
|Maintenance strategy||Expert motor servicing center motor routine maintenance procedure: cleansing stator and rotor – changing carbon brush or other elements – vacuum F strain dipping paint – drying – Calibration balance.
one. Use setting need to be always dry, motor surface area ought to be held clean, air intake must not be hindered by dust, fibers and other obstacles.
two. When the thermal security of the motor proceeds to function, it need to be ascertained regardless of whether the fault comes from the motor or the overload or the location value of the protective gadget is way too minimal. Soon after eliminating the fault, it can be place into operation.
three, ensure that the motor is nicely lubricated in the course of procedure. The standard motor runs for about 5000 several hours, that is to say, lubricating grease should be included or changed. When bearing overheating or lubricating deterioration is identified in procedure, the hydraulic stress ought to change lubricating grease in time. When replacing grease, the outdated grease should be removed, and the oil groove of bearing and bearing include ought to be washed with gasoline. Then ZL-3 lithium grease ought to be stuffed with 1/two (two poles) and 2/three (4 poles, six poles and eight poles) of the cavity in between the internal and outer rings of the bearing.
4. When the life of the bearing is over, the vibration and sound of the motor will increase certainly. When the radial clearance of the bearing reaches the adhering to worth, the bearing should be changed.
five, when eliminating the motor, it is Okay to remove the rotor from the shaft extension or the non extension conclude. If it is not needed to unload the enthusiast, it is a lot more practical to get out the rotor from the non-axle extension finish. When pulling out the rotor from the stator, the stator winding or insulation ought to be prevented from currently being destroyed.
6. When replacing the windings, the sort, measurement, turns and gauges of the first windings should be recorded. When these information are lost, they must be obtained from the producer and the original made windings ought to be transformed at will, which often deteriorates a single or numerous functionality of the motor or even makes it not possible to use them.