HF-IM plastic vacuum and stress forming machine is a trim-in-area type thermoforming device which normally takes advantage of mould with policies metal knife for carrying out forming and cutting in the same station. and the 2nd and the 3rd reduce-station are CZPT for performing fuction of put up-trim and hole-punch.
it is excellent for making component of PP PET PS and so on and entirely routinely creates disposable rectangular or square or spherical shaped roll-edged containers and trays with forming, trimming, and stacking conveying on 1 procedure cycle.
plastic vacuum and pressure forming machine Use Steel-Rule-knife for carrying out forming and slicing in the exact same station
Trim-in-spot for processing PP PET PS PVC BOPS materials and many others. specially best for PP .
Next reduce-press and 3rd reduce-press are CZPT for hole punching and submit-trim
Automatic stacking ,counting device and conveying technique
Trim-in-spot for components with rolled edge (turn-down lip)
Technologies of trim-in-location brings a neat and equivalent trimming(reducing)
Plug assistant for deep forming of attract
Floating knife and free of charge knife are CZPT for put up-trimming movie with higher shrinkage fee.
Additional Contact Warmth plate for Minimizing power usage is CZPT.
|Mould Region||800*600mm Max|
|Depth of Draw beneath sheet||a hundred and twenty mm Max|
|Depth of Attract above sheet||30mm Max/120mm Max|
|The Second Cut-Press||Obtainable|
|The 3rd Reduce-Push||Accessible|
|Ideal content||PP PET PS PVC BOPS|
|Sheet Width||460- 850 mm|
|Material Thickness Selection||.two-1.5mm|
|Substance Roll Diameter||1000 Max|
|Dry operate Pace||45cycles/min Max.|
|Electrical power Source||three-N AC380V±15V ,(others at request)|
|Air Intake||2500 Liters/min|
|Cooling Water Use||13 Liters/min 15° – 20°C|
|Trim-in-location with 2nd cut-press IM-3in1 (optional)|
|Trim-in-place with 2nd reduce-push and 3rd minimize-push IM-4in1 (optional)|