This machine characteristics:
The machine is properly-assembled and assembled with affordable look and realistic structure. The whole equipment runs efficiently and has minimal noise. The PLC double servo traction control is adopted, so that the materials on the discharge and the elevated frame are repeatedly pulled CZPT by the third traction motor at a continual pace. Temperature computer centralized manage lowers energy intake. The intermediate rigidity floating roller adopts the dynamic compensation mode, so that it fluctuates up and down during the pulling process, and the intermediate tension management is stable.
Device operate: 3 aspect sealing
Primary electrical configuration: traction two servo motor, with Panasonic PLC, primary travel inverter push Movement motor, temperature control fourteen way, unwinding consistent stress.
Suitable for base components: plastic composite film this kind of as BOPP, CPP, PET, PVC, nylon, and many others.
Multi-layer co-extruded film, aluminized composite film, paper-plastic composite movie, pure aluminum foil composite film.
Mechanical highest beat: one hundred fifty moments / min
Proportions: 9000 × 1900 × 1950 mm (length × width × height)
Machine excess weight: 5800KGS
|Traction component||Traction motor||1KW,one.5KW||2sets||Panasonic|
|Pneumatic Elements||ZheJiang Airtac|
|Primary travel area||reducer||one:13||1set||German SEW|
|Touch display||10.2inch||1set||ZheJiang weinview|
|Reliable Relay||12pcs||ZheJiang MIRO|
|Magnetic powder brake||two.five||1set||ZheJiang|
|Principal manage cupboard||CZPT photocell||1set||China|
|CZPT part||Joint bearing||Korea|
|Photoelectric monitoring section||photocell||1pc||Italy|