Low Rpm Gear Motor DC 6V 12V 24V Apply to Armarium

We are a expert manufacturer for micro DC motor, our products include carbon brush motor, metal brush motor, brushless motor, stepper motor. We got CZPT, TS16949 certificate, if you have any enquiry, remember to come to feel free to make contact with me.

1.one. Size:Dia:16*fifteen.five*18.6mm
one.2. Finish Perform:.5mm MAX 
one.3. Functioning Temperature:    -10 ~ +60°C

Be aware:

        one. Shaft length,D-formed measurement and duration can be custom manufactured.

        2. L is 14 and redcution ratio: 100:1

        3 Reduction ratios for alternative:

2.1.MEASURING Conditions
       one.one.Rated voltage:             6  V DC
       1.two.Motor Place:            To be calculated with motor horizontally held.
       1.three.Environmental temperature:25±10°C.
       one.4.Environmental humidity:sixty five%±20%RH.

two.2.CZPTAL Qualities (At initial phase following 30 seconds run-in): 
      two.two.one.At No load
            2.one.1.Speed:              146.three ±12%rpm
            two.1.2.Current:            .084  A(max   .17A)

      2.2.2.At On load
            2.two.one.Torque:             .28 kg.cm
            2.two.2.Velocity:              126.five ±12%rpm
            2.2.3.Recent:            .18  A (max   .27A)

      2.2.3.Direction of Rotation:      CCW  (Counter-Clockwise when viewing from the output shaft finish with constructive voltage applied to positive terminal.)

Remark:The above technological datas are only for reference,we can customerize them according to various requirements after analysis.