high good quality DC Motor for oil press
| Motor characteristic | |||||||||
| Products code | Voltage(V) | Electrical power(W) | No load | Load | Equipment Ratio | Motor size(mm) | |||
| Velocity(RPM) | Present(A) | Velocity(RPM) | Current(A) | Torque(N.M) | |||||
| D59L/R-1230-fifteen | 12 | thirty | 15±5 | ≤1.2 | 12±2 | ≤4.5 | ≥4. | one:70 | eighty |
| D59L/R-2430-15 | 24 | thirty | 15±5 | ≤1.two | 12±2 | ≤4.5 | ≥4. | 1:70 | eighty |
| D59L/R-2450-36 | 24 | thirty | 36±5 | ≤1.two | 32±2 | ≤6.5 | ≥8. | one:70 | 80 |
| D59L/R-1230-65 | twelve | 30 | 65±3 | ≤1.2 | 60±3 | ≤5.five | ≥6. | one:56 | eighty |
| D59L/R-2430-sixty five | 24 | 30 | 65±3 | ≤1.two | 60±3 | ≤5.5 | ≥6. | 1:56 | eighty |
| D59L/R-4830-65 | 48 | thirty | 65±3 | ≤1.2 | 60±3 | ≤5.five | ≥6. | 1:56 | 80 |
| D59L/R-4230-130 | forty two | 30 | 130±5 | ≤1.five | 100±5 | ≤6.five | ≥4. | 1:28 | 80 |
| D59L/R-2430-150 | 24 | 30 | 150±5 | ≤1. | 130±5 | ≤6.5 | ≥4. | one:28 | eighty |
| D59L/R-2430-180 | 24 | thirty | 180±5 | ≤1.two | 150±5 | ≤6.five | ≥4. | one:28 | 80 |
| D59L/R-2430-210 | 24 | thirty | 210±5 | ≤1.five | 180±5 | ≤6.five | ≥4.two | 1:28 | eighty |
| Observe | The parameters of the motors over are for your reference, we can layout and manufacture according to your | ||||||||
| essential like voltage,power,speed,torque and proportions | |||||||||
| Voltage:≤48VDC Energy:≤60W Output Speed:≤180RPM | |||||||||
| Velocity sensor: corridor sensor, encoder, opto sensor | |||||||||
| Software: welding device,electrical household,diamond machiney,office clever enquipment,resort leisure, | |||||||||
| automatic and so on. There are a lot of sorts of equipment ratio for your desire | |||||||||
Our organization FAQ for you
(one) Q: What type motors you can supply?
A:For now,we largely supply Kitchen Hood Motor,DC Motor,Gear Motor,Enthusiast Motor Refrigerator Motor,Hair Dryer Motor Blender Motor Mixer Motor,
Shade Pole Motor,Capacitor Motor,BLDC Motor PMDC Motor,Synchronous Motor,Stepping Motor etc.
(two) Q: Is it possible to visit your factory
A: Confident. But remember to kindly preserve us posted a handful of times in progress. We need to check out our
timetable to see if we are CZPT then.
(3) Q: Can I get some samples
A: It is dependent. If only a few samples for private use or alternative, I am afraid it will
be hard for us to offer, because all of our motors are customized manufactured and no stock
CZPT if there is no even more demands. If just sample screening prior to the formal purchase and
our MOQ, value and other terms are suitable, we might really like to supply samples.
(4) Q: Is there a MOQ for your motors?
A: Sure. The MOQ is between a thousand~10,000pcs for diverse versions following sample acceptance.
But it is also alright for us to take smaller sized lots like a number of dozens, hundreds or 1000’s
For the initial three orders right after sample approval.For samples, there is no MOQ need. But the much less the greater (like no more than 5pcs) on situation that the quantity is sufficient in situation any changes necessary right after original screening.
