Flexible Exhaust Metallic Hose / Pipe Generating Equipment^
1. Merchandise Information
What can our equipment make?
one. Spherical Interlock Hose (2S & 3S)
2. Polygonal Interlock Hose (2S & 3S)
three. Interlock Hose with Yarm
four. Car / Boat Engine Flexible Exhaust Pipe
Construction
two. CZPT Parameter
a. Equipment No.one:
Machine Variety | CF-a hundred and fifty |
Available Condition | Round or polygonal with distinct forming dies |
Dimensions assortment | ID38-150 |
Forming speed | a hundred and fifty-350m/8hrs |
Strip thickness | .25-.5mm |
Strip width | 16 and 20mm |
Electricity | 4KW |
Outer dimensions | 3500mmX1200X1600mm |
Weight | 950kgs |
b. Device No.2:
Equipment Variety | CF-300 |
Offered Condition | Spherical or polygonal with different forming dies |
Size assortment | ID150-three hundred |
Forming speed | a hundred-200m/8hrs |
Strip thickness | .twenty five-.8mm |
Strip width | 16,twenty, 28, 32mm |
Electrical power | 11KW |
Outer dimensions | 3500mmX1200X1600mm |
Weight | 1200kgs |
c. Other Types’ Parameter
Generating dimensions/mm | ID38-a hundred and fifty | ID75-three hundred | ID200-four hundred | ID38-65 |
Velocity M/H | one hundred-120 | a hundred and fifty-400 | a hundred-a hundred and twenty | a hundred and fifty-four hundred |
Strip size /mm | 16-twenty*.twenty five-.five | twenty*.45m | 28*.five-.eight | fifteen*.twenty five |
Type | Polygonal | Spherical | spherical | polygonal |
three. Device Instruction
Principal: the equipment incorporated advanced technological innovation, the common wheels and 4 pairs of forming wheels will be used to type the hose action by step. The measurement of the interlock hose will be same as forming mildew.
Method:
one. Seven pairs of wheels are all transmission wheels (refers to wheel drawings), the very first pair of wheel is positioning (refers to wheel drawing 001).They can not be pressed too difficult to prevent too fast feeding.The allowable tolerance in both sides can not be a lot more than .3mm. The third pair are folding wheels(refers to drawing 3),the folding diploma of asymmetry will not be much more than .3mm. The fourth pair folding & shaping wheel(refer to wheel drawing 004), the strip will be folded and formed to be 90° angle. The fifth pair (refer to drawing 5) will make 90° angle strip 60° angle.
2. Soon after the strip goes via seven pairs of wheels, wind and correct the strip on the forming mould, and then push the slot stage by phase with seven pressing wheels. Operate the machine slowly and gradually until the proper hose will come out.
3.The transmission wheels have been altered before shipping from the factory.
When altering the 4 middle urgent wheels, make sure you notice: the first pair can not be also restricted, then the second will be tighter than first, the other will be by the identical way.
The turning course of center urgent wheels:
Changing Method:
The seven pairs of wheels(1-seven) will be positioned with spacers, the upper wheel should be in the same center line with decrease wheel, do not correct them. There are spacers inside reduce wheels which have been modified just before shipping and delivery. The spacers outside the wheels will be pressed by the nuts. The spacers of diverse thickness will be utilized to make positive the lower wheel just in the center of the strip and each sides folded similarly. The five pairs of wheels must be pressed down parallelly with exact same force. Make certain the strips are not ruined when pressing down the wheels.
Never fasten the nuts on the pressing resources to maintain the spring inside can move freely.
You require to put gasket when it is required to make tight interlock hose.
When modify the transmission wheels, it is essential to free all wheels, and then let the wheels tumble down freely and then fasten.
Maintain the distance in between pressing wheel help and the massive plate of the machine 1.5mm one particular than another clockwise.(for 3-s equipment, it will be 1.0mm)
Upkeep:
- Insert the grease in the chain wheel and chain just before commence-up and maintain the shaft and chain are greased correctly.
- Run the machine with uniform speed, in no way speed up or lessen the pace suddenly. When begin up the machine, the pace must be significantly less than 400r/min and max. velocity should not be a lot more than 800r/min.
- Lower off the power offer when the device is not running.
- Fasten the nuts on the wheels and cease them from sliding and hold check to make confident.
four. Firm Overview
Comflex CZPT Co.,Ltd
We supply all kinds of devices relevant to hoses, bellows, and cloth enlargement joints with more than 35 several years. In the meantime, we can also design and manufacture unique tools in accordance your special need. Our equipment have been exported to numerous countries, this kind of as Ukraine,Russia, Viet Nam, India, Canada, Australia, Italy, France, United kingdom, Turkey, etc.. We assure you lengthy-term mutual advantageous cooperation partnership!
5. Software
Exhaust hose creating device are widely utilized to manufacturing exhaust pipe or flex connectors for the truck. When compared with interlock ASS hose, the three-s hose has the following functions:
- Reduced leakage
- Greater sealing overall performance
- Versatile
- Exhaust connector, Exhaust pipe for the truck.
CZPT flexible metallic hose creating. - SS & sss variety, spherical & polygonal kind
No |
Dimensions |
Produce speed/hr |
Strip size(width*thickness) |
1 |
7mm |
two hundred |
4mm*.22mm |
two |
9mm |
two hundred |
6mm*.2mm |
3 |
11,14mm |
two hundred |
seven.1mm*.2mm |
four |
sixteen,eighteen,21mm |
a hundred and fifteen |
8.6mm*.2mm |
five |
26,29,30mm |
a hundred |
9.5mm*.23mm |
six |
32,35mm |
a hundred |
12.7mm*.25mm |
7 |
37,42mm |
100 |
15mm*.3mm |
8 |
45,fifty one,55mm |
one hundred |
17mm*.35mm |
9 |
sixty,63,70,seventy six,80mm |
eighty |
21.2mm*.45mm |
ten |
89,ninety five,102mm |
70 |
25mm*.55mm |
six. Packing & Supply
7. CZPTer Go to
8. Certification
FAQ for interlock hose making machine
Q:Why choose us as your supplier?
A:We are most professional in flexible conduit making machine with more than 30 Years’ experience
Q: What can you supply for flexible conduit making machine?
A: Interlock hose making machine
Squarelock hose making machine
Q:What sizes you machine can make?
A: Interlock Hose:ID3-ID450 on different machines
We need to know the following information to quote you correct machinery:
Q:What type of flexible conduit you need?
A:For instance, square lock or interlock hose, please send us profile drawing or picture to us.
Q:Hose size range
A:Such as:DN8-DN200
Q:Material of hose
A:Such as: Stainless steel (304,316L)/Galvanized steel
Q:Product type
A:Spherical/Polygonal interlock hose