This machine is ideal for the filling and seaming of carbonated soft beverages, beer, and so on. The generation capability is 50-200 cans per minute.
The entire equipment can be divided into two positions, filling and seaming, filling is used for pressure filling, liquid degree is controlled by liquid level filling theory, and the content temperature is appropriate for low-temperature filling. The seal adopts a double – wheel progressive seal.
The rules:
Right after the vacant cans move the conveyor and divided by enter-in cans screw,by the enter-in dialing plate driving enter into the cans-help seat,then the cans-support increase and transfer to the swap valve position, and make the first exhaust,and the cans-assist seat proceed to rise to the filling valve seal.And close the fuel-information pipe instantly,open up the exhaust shut,make the 2nd exhaust then close the exhaust change quickly.The filling barrel keep on rotating a certain angle to the next switch valve place, totally open the filling valve,the material circulation into the cans right up until total.
Soon after the filling process, the filling barrel ratates to the exhaust valve and take away extra force, the cans-assistance plate goes down to break the cans absent from the filling valve.And then the cans will be despatched to the cap falling-down system by the hook chain. Right after the cap falling-down device detect the cans, it falls cap down, and supply the can to the seaming device. Then the cans supported by the plate and are sealed. Last but not least it is shipped by the conveyor.
The Features:
one.The sealing device head seal uses the biaxial composition: the feed sum of the 1st and next roller can be adjusted and managed independently.
two.The secondary exhaust structure of the filling machine: the second exhaust of the filling machine, decrease the oxygen articles in the tank and increase the shelf daily life
3.Weighty bearing widely utilized in this machine the imported bearings are utilized in the crucial heavy loading spot so that the provider daily life and steadiness can be prolonged.
4.Higher top quality parts: We use Siemens PLC, daida inverter, contact monitor, Yad solenoid valve and Omron proximity swap.
5.Convenient Operation: The production speed can be adjusted on touch screen The device will routinely alarm when standard malfunctions takes place, and will also give the corresponding reasons. In accordance to the severity of the malfunctions, PLC will decide whether or not to cease the device.
6.The equipment has excellent look, steady operation and reduced sounds. It is the most perfect filling and seaming equipment in China at present.
